Dubai, UAE, February 08, 2018:  Anything but ordinary: a Regulator is not a watch like any other. This form of displaying the time has a tradition going back more than two centuries. It stands for what is special, unique and does not become immediately apparent to everyone. And this is more fundamental than ever: reading the dials with off-centre hour and second’s hands takes a moment of focusing.

 

By consciously taking out this moment in today's fast-moving times, you take control of your own time again, which Chronoswiss fittingly words as 'Regulate your time' in its claim.

 

The Regulator Classic stands out by its classic and timeless appearance in combination with fresh and sporty emphases. Distinguished details such as the guilloched interior of the display for hours and seconds, the precisely aligned length of the hands and the thrilling contrast between matt-finished and polished surfaces create a harmonious overall appearance.

 

Not least with its carefully selected combinations of colours and materials Chronoswiss has created an unconventional automatic watch that masters the balancing act between watchmaker tradition and timeless design. The model with the 40 mm case made from stainless steel is available in three variants: in an entirely purist form with a dial in galvanic silver and thermally blued hands or, less conventional, in deep midnight blue, while the blue is echoed in both models by the interior of the calfskin strap.

 

The third variant is all classic and sporty: On the dial in galvanic black, signal red tones add that little dynamic extra that is emphasised by the casual rally design of the strap with red colour elements.

 

 

Model                                Sirius Regulator Classic 

References                       CH-8723-SI Stainless steel, dial galvanic silver 

                                          CH-8723-BL Stainless steel, dial galvanic blue 

                                          CH-8723-BK-RALLYE Stainless steel, dial galvanic black 

Displays                           Regulator with central minutes and small seconds 

Case                                 Solid stainless steel case, satin finish and polished, bezel with partial knurling and non-reflecting sapphire crystal, screw-down case                                                back with satin finish and sapphire crystal, onion crown, water resistance up to 3 bar, strap holders screwed down with patented                                                    Autobloc system 

Dimensions                     Ø 40 mm, height 10.45 mm 

Diameter                          Ø 30mm (approx. 13´´´) 

Height                              6.35 mm 

Jewels                             30 

Balance                          Glucydur, three-legged 

Balance spring              Anachron 

Fine adjustment            Via eccentric cam 

Shock protection           Incabloc 

Frequency                     4 Hz., 28,800 A/h (semi-oscillations) 

Power reserve              Approx. 38 hours 

Finish                           Rhodium-plated and engraved rotor with Geneva Stripes, ball bearing mounted; circular-grained plate and bridges; polished lever,                                                 escape wheel and screws 

Dial                               Matt centre, circular-grained rings, totalisers with guilloche, galvanised in various colours depending on design 

Watch hands               Feuille shape; curved, and thermally blued or rhodium-plated and diamond cut or lacquered 

Strap                            Embossed calfskin, with blue or red leather lining and corresponding stitching, or perforated with red coating 

Model                          Sirius Regulator Classic